The K30 10,000ppm CO2 Sensor Module (030-8-0006) is an industry favorite known for its low-cost, accuracy, long life and low maintenance. It is used in hundreds of HVAC and IAQ products and applications. In addition, this CO2 sensor is easy to program with several output options to meet virtually any OEM project specifications.

Features

Ideal for residential, commercial, HVAC or IAQ applications
Simple to install, pre-calibrated and ready-to-use
2 analogue outputs, 2 digital outputs
Proven reliability, low cost, maintenance free

Models

K30 CO2 Sensor (030-8-0006) - for integration into high-volume OEM products.
K30 CO2 Sensor with Custom Outputs (030-8-0006-C) - Customize analog or digital outputs for your application. After ordering, email or fax the Custom Outputs PDF form and we will pre-configure your sensor’s settings. If the form is not received, your sensor will be delivered with default settings.
K30 CO2 Sensor Development Kit (CM-0024) - Easy to use, simply plug the sensor module into your PC via USB. Use our free GasLab® software to measure and graph carbon dioxide in real time or for data logging.
Sensor Development Kit (CM-200) - Easy to use, simply plug the sensor into the PCB and plug it into your PC via USB. Use our free GasLab® software to measure and graph carbon dioxide or use our library of source code on Github to build your own application or for OEM batch testing/configuration. Order sensors on this page, then order the Devkit here.

We recommend that all first-time users purchase either the CM-0024 or CM-200 Development Kit for fastest and easiest results.

Specifications

CO2 Measurement: non-dispersive infrared (NDIR)
Measurement Range: 0 – 10,000 ppm (0-5,000 ppm within specifications)
Rate of Measurement: every 2 seconds
Automatic Background Calibration (ABC): enabled unless specified
Response Time Diffusion: 20 seconds
Response Time Sample Draw: 2 seconds @ .5 l/min tube gas flow
Warm-up Time: < 1 min. (@ full specs < 15 min)
Outputs: 2 analog, 2 digital
Programmable Range: 0-10,000 ppm (custom configuration required)
Repeatability: ± 20 ppm ± 1 % of measured value within specifications
Accuracy: ± 30 ppm ± 3 % of measured value within specifications
Maintenance Interval: no maintenance required
Self-Diagnostics: complete function check at startup
Dimensions: 51 x 58 x 14 mm (Length x Width x approximate Height)
Sensor Life Expectancy: > 15 years

Conforms with Standards

Emission: EN61000-6-3:2001
Immunity: EN61000-6-2:2001
Compliant with ANSI/ASHRAE Standard 62.1-2022
Compliant with RESET grad B
Compliant with WELL Building Standard® (WELL v2™)
RoHS directive 2002/95/EG

Electrical / Mechanical

Power Input: 5.5-14 VDC, stabilized to within 10% (external protection circuits required)
Current Consumption: 40 mA average
Sampling Method: diffusion (tube cap optional)

Warranty

90 days - See CO2Meter Terms and Conditions.

Data Sheet (pdf)

Dimensional Drawings Tube Cap Adapter (pdf)

Senseair ISO Certification (pdf)

Custom Output

Custom Output Configuration Options (pdf)

Custom Outputs E-Mail Form (pdf)

Instructions:

1. Download the PDF form above and save to your hard drive.
2. Open the PDF and enter your values in the fields. Save.
3. Please specify in the form if you wish the ABC
(Automatic Background Calibration) on or off.
4. Please specify in the form if you want to program the
sensor for communication with RS-485.
5. Email as an attachment to sales@co2meter.com and reference your order code.
6. Select K30 1% Custom (030-8-0006-C) and complete your order.

K30 1% Manual (pdf)

K30 Terminal Descriptions (pdf)

Devkit Quick Start Guide (pdf)

Sensor Calibration Procedure (pdf)

Modbus Communication (pdf)

I2C Communication (pdf)

I2C & Modbus Communication Example Code (zip)

Labview Examples for SenseAir K-30 (zip)

Web Application Using PHP and K30 DevKit (pdf)

Raspberry Pi UART Instructions (pdf)

Raspberry Pi UART Sample Code (zip)

Arduino UART Instructions (pdf)

Arduino UART Sample Code (zip)

Arduino I2C Instructions (pdf)

Arduino I2C Sample Code (zip)

Troubleshooting Arduino or Raspberry Pi (pdf)

SenseAir K30, Vaisala CMM222C, ELT S100, KCD AN100 and GE Sensing T6615 Sensor Comparison

Monitoring CO2 Levels Critical for Compost Success

Haney Test Uses CO2 Sensor to Measure Soil Health

School Science Fair Projects Using SenseAir CO2 Sensors

Student project combines CO2 sensor, Arduino Uno

Accessories

Gas Sensor Development Kit - CM-0024 designed to provide customers with an easy drop-in solution. Includes our free Gaslab data logging software. Sensor sold separately.
Tube Cap Adapter changes the sensor from reading CO2 in the air to a sample draw sensor. Use with a pump, tubing and filters to read CO2 levels in enclosed containers.
Sample Draw Pump Kit includes all the components you need with a sample draw sensor to create a closed CO2 measurement system.
Probe Enclosure. Includes hydrophobic filters, protects the sensor when used in hostile environments.

Suppliers

SprintIR®-6S-100 100% CO2 Sensor

030-8-0010 K30 FR Fast Response 10,000 ppm CO2 Sensor

033-8-0007 K33 ELG 10,000ppm CO2 + RH/T Data Logging Sensor

033-9-0023 K33 ICB 10% CO2 Sensor

CozIR®-A 2,000 ppm CO2 Sensor

SprintIR®-W 20% CO2 Sensor

SprintIR®-W 100% CO2 Sensor

CozIR®-A 10,000 ppm CO2 Sensor

033-9-0027 K33 ICB 30% CO2 Sensor

030-8-0006 K30 10,000 ppm CO2 Sensor

ExplorIR®-M 20% CO2 Sensor

SprintIR®-6S-5 5% CO2 Sensor