The Remote Carbon Dioxide (CO2) Storage Safety Alarm and Horn Strobes (formerly known as the RAD-0102-6) is designed to protect individuals near stored carbon dioxide. This fixed gas safety monitor measures CO2 levels and detects leaks to protect facilities from overexposure.

CO2 alarms are critical in restaurants, breweries, wineries, beverage dispensing areas, dry ice storage, laboratories, cultivation facilities, or anywhere more than 100 lbs. of CO2 is stored or produced.

Please note with the purchase of any Remote CO2 Storage Safety 3 Alarm, a surge protector is required for safeguard and longevity of the monitor.

Features

88dB audible and visual alarms
3 relays automatically control fans to ventilate spaces (default: 5,000ppm TWA, 5,000ppm and 3% CO2)
Programmed to meet fire code compliance for all states

Meets NFPA, IFC, and NBIC requirements
Meets OSHA and NIOSH TWA standards
Meets CGA G-6 Carbon Dioxide Monitoring and Supply standards
Meets EH40, AS5034, and UK Health and Safety Act

More flexible - extend remote up to 300 feet from the main unit
All cables are disconnect-able - no hardwiring
Comes with required signage in English and Spanish
4-20 mA output to allow for remote display of values
UL listed for compliance

The CO2 Storage Safety Alarm is easy to install and use. Watch the installation video. Simply mount both units on the wall (all cables and hardware included), plug the monitoring unit into a standard wall outlet, and the alarms are ready to protect your customers and employees. To hardwire the alarm, view the instructions here.

Specifications

Measurement Range: 0-5% (50,000ppm) CO2 Sensor
Alarms: 5,000 ppm TWA, 5,000 CO2, 3% CO2 (configurable)
Alarm Response Time: < 60 seconds
Operating Temperature: 0-50°C (32-122°F)
Calibration: Manual with test gas or factory calibration
Dimensions: SEU: 6.5 x 5.0 x 2.5 in. | RDU: 5.5 x 3.5 x 1.75 in.
Sensor Life Expectancy: 15 years

Electrical

Power Supply: 110-220VAC 50/60 Hz to 12VDC Power Adapter
24VDC hard-wired power option
Power Consumption: 3 Watts
6VDC battery backup connections
Relays: Peak Current < 2A @ 30VDC or 250VAC, SPDT
Relay Color Coding:

Red & White = Normally Open
Blue & White = Normally Closed

Options

RAD-0104 - Additional Remote Display (Supports up to 3 total)
RAD-CDU-HS1 - Additional Centralized Display Unit (Supports 12 sensors)
RAD-PMU - Additional Power Monitor Unit (Alerts if Loss of Power)
CM-HS2 - add-on kit includes 2 extension strobe lights and cables

Warranty

1 year - See CO2Meter Terms and Conditions.

Accessories

RAD-CDU - Central Display Unit. A central display that consolidates visual and audible alerts from up to twelve remote CO2 sensors for easy, centralized monitoring.
RAD-PMU - Power Monitor Unit. A power monitor unit that indicates system status and alarms when the main CO2 safety device loses power
CM-1029 - Industrial Strobe Siren. The industrial strobe siren is designed to provide an additional flashing indicator of a potential gas leak in indoor areas that are using/storing compressed gases.
RAD-0104 - Additional Remote Display. The Sensor display unit comes with one remote display that can be placed up to 300ft. away using CAT5 or greater Ethernet cable (28ft. included in the box). Purchase one or two additional remote displays, then daisy-chain them so long as the total run is less than 300 ft.
SV-1029 Solenoid Safety Shut Off Valve 3/8 inch - designed to be utilized with any of our remote storage safety alarms, and can be directly wired to the SV-1029 24/DC safety shut-off valve.

Indoor Agriculture

CO2 Tank Regulator with Solenoid Valve

Day Night CO2 Monitor & Controller for Greenhouses, Grow Rooms

CO2 Controller for Mushroom Farms

Day Night CO2 Monitor & Controller for Greenhouses - European Model

Remote Carbon Dioxide CO2 Storage Safety 3 Alarm

CO2 Storage Safety 3 Alarm Horn Strobe Lights

CO2 Controller for Grow Rooms

CO2 Controller for Mushrooms

CO2 Industrial Gas Detector

Industrial Stainless Steel CO2 Gas Detector

Digital Multi-Gas Controller System

Fixed Multi-Gas Detector